Skip to main content

The Precision Process™

Nothing Left to Chance

Installs fail because details get missed. We built a process that takes the guesswork out and checks it at every step.

See the Five Steps
5Steps
26Checkpoints
1Standard
Flush-mounted flat-screen TV with a soundbar on a white wall above a wood credenza, with cables hidden Install · DFW Residence

Why Most Installs Go Wrong

Most installs fail before the TV goes on the wall.

They fail in the planning, or because there wasn't any. A process exists because you want confidence, not a coin flip. These are the things homeowners tell us went wrong the first time.

TVs that aren't level
Wrong height for the room
Studs missed or overloaded
Wires left exposed
Cracked or damaged drywall
Installers rushing to the next job
No final check
No one to call when it fails

The Method

Not a list of steps. A system of checkpoints.

The Precision Process isn't just the order we work in. It's a set of checkpoints that holds every install to the same standard. The same way in every home.

Most installs take under an hour for the base install to about three hours for a Frame & Flush installation, depending on scope.

  1. Blue painter's tape outline marking the TV position on a wall beside a power outlet, with a laser level on a tripod Step 01 · Reading the Wall

    Evaluation

    Before anything goes on the wall, we read the wall itself: the framing, the substrate, and where the cables will run. The plan is set before the first hole is drilled.

    Why it matters Good planning prevents bad placement and holes you didn't need.
    We're checking
    Wall type Stud locations Substrate Cable path Mount fit Clearances
  2. Green laser level lines projected across a taped TV outline to confirm height and centering Step 02 · Planning Placement

    Placement Planning

    We don't just center the TV. We set height, sightlines, and position around the room, the furniture, and how you actually watch. Then we tape an outline on the wall so you see it before we mark anything.

    Why it matters Centered isn't always correct.
    We're checking
    Viewing height Seating sightlines Glare Furniture Final position
  3. TV wall-mount bracket fastened inside the taped outline with a level on top, checked against laser lines Step 03 · Mounting and Leveling

    Secure Installation

    The mount goes up. We match the anchoring to the wall and torque the hardware to spec, into stud, masonry, or steel-stud framing. Every mount is load-rated and stress-tested before your TV goes on.

    Why it matters This is where most installers begin. For us, it's the middle.
    We're checking
    Anchor match Torque spec Load rating Stress test Level
  4. Mounted TV bracket with cables routed to a nearby wall outlet for in-wall concealment Step 04 · Cables Managed, Room Clean

    Wire Management

    Cable management is built into the process, not added at the end. Everything runs clean, so the room looks finished, not just functional. Here's what's available:

    TV Mounting · In-wall signal cables TV Cable Concealment · Full in-wall concealment Frame & Flush TV Installation · In-wall with media enclosure
    We're checking
    Cable routing In-wall option Device layout Room finish
  5. Finished TV installation with a soundbar mounted level above a wood credenza in a living room Step 05 · Final Walkthrough, Together

    The Approval Standard

    No job is done until you walk through everything and tell us it's right. That's the only thing that closes a job.

    Why it matters Quality is confirmed, not assumed.
    Together we check
    TV level (laser) Position Stability Function Cable finish Your sign-off

    You approve, or we're not done.

After the Approval

The workspace is restored to the same standard as the install itself. We don't leave until the room is cleaner than when we arrived.

  • We haul out every piece of debris, every install.
  • For cable concealment and Frame & Flush installs, we set up your TV inputs before we leave.
  • We follow up after the job to make sure everything is still right.

Lifetime No-Fall Guarantee: if anything we installed ever needs fixing, for as long as the TV and mount stay in place, we come back and fix it. No charge.

Ready to see the process in your room?

Get Your Quote See Pricing →

Flat-rate pricing, confirmed before install day.

Our Standard

What has to be true before we call it done.

These aren't tasks on a list. They're the outcomes every install has to meet before we pack up.

Structural securityVerified
Level alignmentVerified
Intentional placementVerified
Clean cable managementVerified
Protected finishesVerified
Functional testingVerified
Clean work areaVerified
Customer approvalVerified

What This Means for You

When every step has a purpose, you spend less time wondering whether something got missed, and more time enjoying the room.

Planned. Executed. Verified.

Every install begins online. Pick your install, see your flat-rate price, and book your date in under two minutes.

Transparent pricing, confirmed before install day.

Get Your Quote

See pricing and what each install includes →